From the box to your first reading in 15 minutes.

No building work, no cables, no installers. This is exactly what happens from the moment you order your kit until you see your first cold room measuring itself.

Cold room with goods on the shelves and a Cooling Patrol sensor on the back wall
How it works

From the sensor in your cold room to your phone

This is what Cooling Patrol does every day, without you having to do anything.

  1. Cooling Patrol sensor installed on a cold room wall
    01 · Measures

    One sensor in each cold room

    It measures the temperature every minute, 24 hours a day, without anyone having to remember.

  2. Cooling Patrol sensor raising an alarm in a cold room
    02 · Detects

    If something fails, the alarm goes off

    If temperature or humidity goes out of range (a door left ajar, a power cut or a compressor that stops cooling), it detects it immediately.

  3. Chiller and freezer room, each with its own sensor
    03 · Each room, its own range

    Chiller or freezer

    You set each cold room’s alarm for its goods: from 0 to 8 °C or down to −18 °C.

  4. Cooling Patrol hub receiving the sensors’ signal in the office
    04 · Transmits

    The hub receives the signal

    Over LoRa radio, which gets through the cold room’s metal walls, and uploads it to the platform.

  5. Cooling Patrol temperature alert on a mobile phone screen
    05 · Alerts you

    The alert reaches your phone

    By SMS, Telegram, email or on the platform, wherever you are.

Step by step

This is how easy it is to install

Close-up of the Cooling Patrol sensor with the Electronic Circuit Design label, design and manufacturing0
Step 0 · Order your kit

Choose your kit

Tell us how many cold rooms you have, choose your kit and we ship it to your business.

Close-up of a Cooling Patrol sensor1
Step 1 · It arrives

Open the box

Inside: the hub, 3 sensors and a two-page guide. Nothing to assemble, nothing to program in advance.

Cooling Patrol hub connected to the router with a network cable2
Step 2 · Connect the hub

Plug in and connect

Plug it into the mains and connect it to your router by network cable (RJ45) or Wi-Fi. Whichever you prefer.

Cooling Patrol sensor mounted on the cold room wall3
Step 3 · Place the sensors

One per cold room

Magnet or adhesive, no tools and not a single hole. Less than a minute per sensor.

Person checking Cooling Patrol on their phone in the street4
Step 4 · Open the app

Your first reading is in

It appears instantly, with nothing to program. If you can see it in the app, it is working.

Your app

What you will see in your app

Cooling Patrol temperature alert on a mobile phone screen

Command Center

The status of every cold room at a glance, with temperature, humidity and active alerts.

Cooling Patrol platform on the office computer, next to the hub

Official temperature log

The report with its compliance seal, ready to download and show.

✓ HACCP compliant
Frequently asked questions

What teams usually ask before installing it

Do I need a technician or an installer?

No. Cooling Patrol is designed precisely so you do not depend on one: plug in the hub, place the sensors and you are done.

Can I move a sensor from one cold room to another?

Yes. You can reposition it whenever you change the layout or use of your cold rooms.

What if the Wi-Fi coverage in my kitchen or storeroom is poor?

The sensors do not rely on your Wi-Fi to communicate. The link between the sensors and the hub is designed for exactly that situation.

How long until it starts measuring?

As soon as you connect the hub and place the sensors, the first reading should appear almost instantly.

Ready to get started?

Cooling Patrol costs €550.00. Prices exclude VAT. Taxes and shipping are shown before you confirm the order.

Back to the offer →

Who is behind it

We design it, we make it and we support you ourselves.

Cooling Patrol is made by Electronic Circuit Design, an electronics design and manufacturing company. You buy the kit and get sales and technical support directly from the people who make it.

Cooling Patrol sensor label: Electronic Circuit Design, design and manufacturing
Design and manufacturing

ELECTRONIC CIRCUIT DESIGN, SLU

Tax ID
B16504821
Offices
C/ Sophia Germain 1, Edificio Lleret, Planta Subsuelo, Parque Tecnológico Bit, 07121 Palma de Mallorca, Illes Balears
Contact
ecdsl@ecdsl.com · WhatsApp +34 621 357 411
Website
ecdsl.com
Distributors and agents

Would you like to become our distributor or agent?

If you sell to or service businesses with cold rooms, you can offer Cooling Patrol in your area. Tell us who you are and we will explain how we work.

  • Distributor You add Cooling Patrol to your catalogue and sell it to your customers.
  • Agent You introduce Cooling Patrol to businesses in your area.
3-sensor kit + Hub€550.00
Buy now
Contact us on WhatsApp